Home Installation High Speed Wireless Modem

Installing and setup of your new Choice Modem is easy. Just follow these simple steps.

1. Remove the Choice high speed modem from the box and place it next to a window for best performance.
2. Connect the modem to your PC or Laptop computer using the Ethernet cable provided.
3. With the Choice Logo facing you, position the opposite side of the modem towards an open window.
4. Plug in the modem power supply and connect it to the modem.
5. Green lights on the top of the modem will begin to flash as the modem performs a self test.
6. The lights will come on steady when the modem is receiving a signal from Choice.
   (If you do not have steady lights, adjust the position of the modem until the lights stop flashing.)
7. Continue to position the modem to receive 2-5 bars of signal.

That’s it! You have successfully installed your new high speed Choice modem and you are ready to surf the Internet.

Note: Metal window screens and security bars may interfere with the wireless signal. For best performance, replace metal window screens with fiberglass screens.